Product Details：

It can realize secondary cooling and automatic de-flashing of products.

20-30L five-layer automated production line product manual

Double or single frame, single or double die

Die center distance: double head 320mm

Single to three layers with transparent lines

Daily production (24 hours) up to 50 seconds

Can produce 20-30L plastic hollow products

Fully automated, high volume production of blow molding products

This model produces four 10L barrels for a cycle of about 40-50 seconds, or two 30L barrel high speed blow

molding machines for one cycle of about 50-60 seconds.

Technical Parameters:

Screw diameter: Φ90mm

Screw ratio (length, diameter): 30:1

Screw speed (50HZ): 10-75 r/min

Extrusion amount (PE): 180kg/h

Barrel heating section: 6

Molding stroke: 640mm

Mode locking stroke: 380-750mm

Clamping force (160Bar): 30T

Dry cycle: 6.9S

Rubber thickness control: 100-300dpi

Cooling water consumption: 0.6 M3/min (0.3Mpa, 180C)

Compressed air consumption: 4.0 M3/min (0.8Mpa)

Mechanical net amount (approximately): 22T

Power consumption parameter

Frequency conversion motor: 55KW

Screw heating section (PE): 27KW

Hydraulically driven servo motor: 37+4KW

Die heating section: 16KW

Maximum power consumption of machinery: 139KW

Superjinjun

DKW-30T