Product Details：

DKW-10T Model-1.jpg DKW-10T Model-2.png

product manual:

1. Double mold frame, single die to six die

2. Die center distance: double head 180mm, three heads 120mm, four heads 100mm, six heads 60mm

3. Single to six layers with transparent lines

4. Daily output (24 hours) can reach 12,000 to 86,000

5. Can produce 0.3-5L plastic hollow products

Technical Parameters

Screw diameter: Φ70mm

Screw ratio (length, diameter) 26:1

Screw speed (50HZ): 10-80r/min

Extrusion amount (PE): 100Kg/h

Barrel heating section: 4

Molding stroke: 530mm

Mode locking stroke: 180-550mm

Clamping force (160Bar): 10T

Dry cycle: 3.4S

Rubber thickness control: 100-300dpi

Cooling water consumption: 0.6M3/Min (0.3Mpa, 18°C)

Compressed air consumption: 2.0 M3, /Min (0.8Mpa)

Machine net weight (approximately): 12T

Mechanical size: 5100*2700*3100 (mm)

Power consumption parameters:

Frequency conversion motor: 30KW

Screw heating power: 14KW

Hydraulic servo motor: 18.5KW+2.2KW

The maximum power consumption of the die: 72.7KW

DKW-10T Model-3.jpg DKW-10T Model-4.jpg

Superjinjun

DKW-10T Model