Product Details：

DKW-15T Model-1.jpg

product manual:

1. Double mold frame, single die to eight die

2. Die center distance: double head 220mm, three heads 140mm, four heads 120mm, six heads 80mm, eight heads 60mm

3. Single to six layers with transparent lines

4. Daily output (24 hours) can reach 1..50,000 to 100,000

5. Can produce 0.4-8L plastic hollow products

Technical Parameters

Screw diameter: Φ80mm

Screw ratio (length, diameter) 28:1

Screw speed (50HZ): 10-75r/min

Extrusion amount (PE): 120Kg/h

Barrel heating section: 5

Molding stroke: 600/700mm

Mode locking stroke: 180-550mm

Clamping force (160Bar): 15T

Dry cycle: 3.9S

Rubber thickness control: 100-300dpi

Cooling water consumption: 0.6M3/Min (0.3Mpa, 18°C)

Compressed air consumption: 2.0 M3, /Min (0.8Mpa)

Machine net weight (approximately): 15T

Mechanical size: 5480*3000*3160(mm)

Power consumption parameters:

Frequency conversion motor: 45KW

Screw heating power: 17.2KW

Hydraulic servo motor: 22KW+2.2KW

The maximum power consumption of the die: 90.4KW

DKW-15T Model-2.jpg DKW-15T Model-3.jpg DKW-15T Model-4.jpg

Superjinjun

DKW-15T Model